Grizzly Benchtop G0625 Manual de usuario descargar pdf

Introduction

The Model G0625 Extension Table extends the

bed length of the Model G0624 10" Benchtop

Lathe to 38" between centers.

Inventory: (Figure 1)

A. Extension Bed ............................................ 1

B. Rubber Feet ............................................... 2

C. Cap Screws M8-1.25 x 35 .......................... 4

D. Flat Washers 8mm ..................................... 4

E. Hex Wrench 6mm ...................................... 1

Installation:

1. Install the feet into the bottom of the exten-

sion table.

2. Align the mounting holes in the extension

table and the tailstock end of the Model

G0624 bed.

3. Thread four cap screws with flat washers

through the extension table and lathe, and

finger tighten.

4. Center the tailstock over the extension table

and lathe as shown in

Figure 2.

5. Tighten the cap screws with the hex wrench,

to bring the bed extension and lathe surfaces

even with the bottom of the tailstock.

6. Slide the tailstock over the bed.

—If the tailstock catches on the area where

the lathe and extension table meet, loosen

the fasteners and repeat Steps 3-5

until

the tailstock slides smoothly.

MODEL G0625

BENCHTOP LATHE

EXTENSION TABLE

INSTRUCTION SHEET

Figure 1. Model G0625 inventory.

Figure 2. Tailstock centered over extension

table and lathe.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#BL8694 PRINTED IN CHINA

Model

G0624

Extension

Table

7. Place a straightedge over the extension table

and lathe beds and check to see if both are

parallel and aligned.

1 2

Indice de contenidos

Pagina 1 - EXTENSION TABLE

IntroductionThe Model G0625 Extension Table extends the bed length of the Model G0624 10" Benchtop Lathe to 38" between centers

Pagina 2 - Masking

REF PART # DESCRIPTION1 P0625001 BED EXTENSION2 P0625002 RUBBER FOOT3 PN08 HEX NUT 3/8-164 PW01M FLAT WASHER 8MM5 PSB40M CAP SCREW M8-1.25 X 356

Comentarios a estos manuales

Sin comentarios

Grizzly Benchtop G0625 Manual de usuario

Busca en linea o descarga Manual de usuario para Herramientas Grizzly Benchtop G0625. Grizzly Benchtop G0625 User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Herramientas Grizzly Benchtop G0625